Nadine is a medium-large diaphragm condenser mic specifically designed for use on upright basses. The low end is tuned to give a flat response at the mounting distance, and the cardioid pickup pattern provides very natural sound by picking up as much of the surface of the bass as possible, within the constraints of the close placement. There’s great rejection off the back of the mic, allowing use with stage monitors.
Physically, the mic is separated into the body, which securely straps to the tailpiece with velcro elastic, and the head, which mounts easily between the strings above the tailpiece using a rubber grommet. The 14-inch Mogami cable that connects the two parts makes it easy to place the mic ideally on any bass. This mounting system makes Nadine both easy to move from instrument to instrument and secure enough to leave on one bass permanently. After years of being asked for a mic specifically designed to meet the needs of the acoustic upright player, we think we’ve found the best design yet for this demanding application.
Chantelle is an end-address large-diaphragm condenser with flexible pivoting body, very feedback resistant, excellent for live vocals and acoustic instruments.
Chantelle was created to be the best available live vocal mic. She brings the clarity, warmth, and character of a large diaphragm capsule to a beautiful low-profile body ideal for close-micing. She has a smooth high end with no harshness and a very gentle upper-midrange emphasis. She also incorporates a full foam pop filter for great plosive protection. With exceptional feedback rejection, she can be used on even the loudest of stages.
Her warm, present tone is also great on acoustic instruments.
Hand-made microphone with unique appearance
Side or end address, using pivoting bracket
Capsule and electronics tuned for close vocal use on the loudest of stages with excellent feedback rejection
Internal shock dampers for minimal handling noise
Integral silk and mesh pop filter, for effective control of plosives without loss of clarity
Transformerless FET fully balanced electronics
Highest quality hand-wired electronic components – film caps, precision resistors, hand tested and matched transistors, with component values tuned for the individual circuit.
Close micing vocals and acoustic instruments in demanding live settings, and in the studio.
|Dimensions||10 × 10 × 8 in|